Chapter 4 Working with Unix

It is not the knowing that is difficult, but the doing. - Chinese proverb

4.1 Self-Help

Each of the commands that we’ve discussed so far are thoroughly documented, and you can view their documentation using the man command, where the first argument to man is the command you’re curious about. Let’s take a look at the documentation for ls:

man ls

LS(1)                     BSD General Commands Manual                    LS(1)

NAME
     ls -- list directory contents

SYNOPSIS
     ls [-ABCFGHLOPRSTUW@abcdefghiklmnopqrstuwx1] [file ...]

DESCRIPTION
     For each operand that names a file of a type other than directory, ls
     displays its name as well as any requested, associated information.  For
:

The controls for navigating man pages are the same as they are for less. I often use man pages for quickly searching for an option that I’ve forgotten. Let’s say that I forgot how to get ls to print a long list. After typing man ls to open the page, type / in order to start a search. Then type the word or phrase that you’re searching for, in this case type in long list and then press Enter. The page jumps to this entry:

     -l      (The lowercase letter ``ell''.)  List in long format.  (See below.)
             If the output is to a terminal, a total sum for all the file sizes is
             output on a line before the long listing.

Press the n key in order to search for the next occurrence of the word, and if you want to go to the previous occurrence type Shift + n. This method of searching also works with less. When you’re finished looking at a man page type q to get back to the prompt.

The man command works wonderfully when you know which command you want to look up, but what if you’ve forgotten the name of the command you’re looking for? You can use apropos to search all of the available commands and their descriptions. For example let’s pretend that I forgot the name of my favorite command line text editor. You could type apropos editor into the command line which will print a list of results:

apropos editor

## ed(1), red(1)            - text editor
## nano(1)                  - Nano's ANOther editor, an enhanced free Pico clone
## sed(1)                   - stream editor
## vim(1)                   - Vi IMproved, a programmers text editor

The second result is nano which was just on the tip of my tongue! Both man and apropos are useful when a search is only a few keystrokes away, but if you’re looking for detailed examples and explanations you’re better off using a search engine if you have access to a web browser.

4.1.1 Summary

• Use man to look up the documentation for a command.
• If you can’t think of the name of a command use apropos to search for a word associated with that command.
• If you have access to a web browser, using a search engine might be better than man or apropos.

4.1.2 Exercises

1. Use man to look up the flag for human-readable output from ls.
2. Get help with man by typing man man into the console.
3. Wouldn’t it be nice if there was a calendar command? Use apropos to look for such a command, then use man to read about how that command works.

4.2 Get Wild

Let’s go into my Photos folder in my home directory and take a look around:

pwd

## /Users/sean

ls

## Code
## Documents
## Photos
## Desktop
## Music
## todo-2017-01-24.txt

cd Photos
ls

## 2016-06-20-datasci01.png
## 2016-06-20-datasci02.png
## 2016-06-20-datasci03.png
## 2016-06-21-lab01.jpg
## 2016-06-21-lab02.jpg
## 2017-01-02-hiking01.jpg
## 2017-01-02-hiking02.jpg
## 2017-02-10-hiking01.jpg
## 2017-02-10-hiking02.jpg

I’ve just been dumping pictures and figures into this folder without organizing them at all! Thankfully (in the words of Dr. Jenny Bryan) I have an unwavering commitment to the ISO 8601 date standard so at least I know when these photos were taken. Instead of using mv to move around each individual photo I can select groups of photos using the * wildcard. A wildcard is a character that represents other characters, much like how joker in a deck of cards can represent other cards in the deck. Wildcards are a subset of metacharacters, a topic which we will discuss in detail later on in this chapter. The * (“star”) wildcard represents zero or more of any character, and it can be used to match names of files and folders in the command line. For example if I wanted to list all of the files in my Photos directory which have a name that starts with “2017” I could do the following:

ls 2017*

## 2017-01-02-hiking01.jpg
## 2017-01-02-hiking02.jpg
## 2017-02-10-hiking01.jpg
## 2017-02-10-hiking02.jpg

Only the files starting with “2017” are listed! The command ls 2017* literally means: list the files that start with “2017” followed by zero or more of any character. As you can imagine using wildcards is a powerful tool for working with groups of files that are similarly named.

Let’s walk through a few other examples of using the star wildcard. We could only list the photos starting with “2016”:

ls 2016*

## 2016-06-20-datasci01.png
## 2016-06-20-datasci02.png
## 2016-06-20-datasci03.png
## 2016-06-21-lab01.jpg
## 2016-06-21-lab02.jpg

We could list only the files with names ending in .jpg:

ls *.jpg

## 2016-06-21-lab01.jpg
## 2016-06-21-lab02.jpg
## 2017-01-02-hiking01.jpg
## 2017-01-02-hiking02.jpg
## 2017-02-10-hiking01.jpg
## 2017-02-10-hiking02.jpg

In the case above the file name can start with a sequence of zero or more of any character, but the file name must end in .jpg. Or we could also list only the first photos from each set of photos:

ls *01.*

## 2016-06-20-datasci01.png
## 2016-06-21-lab01.jpg
## 2017-01-02-hiking01.jpg
## 2017-02-10-hiking01.jpg

All of the files above have names that are composed of a sequence of characters, followed by the adjacent characters 01., followed by another sequence of characters. Notice that if I had entered ls *01* into the console every file would have been listed since 01 is a part of all of the file names in my Photos directory.

Let’s organize these photos by year. First let’s create one directory for each year of photos:

mkdir 2016
mkdir 2017

Now we can move the photos using wildcards:

mv 2017-* 2017/
ls

## 2016
## 2016-06-20-datasci01.png
## 2016-06-20-datasci02.png
## 2016-06-20-datasci03.png
## 2016-06-21-lab01.jpg
## 2016-06-21-lab02.jpg
## 2017

Notice that I’ve moved all files that start with “2017-” into the 2017 folder! Now let’s do the same thing for files with names starting with “2016-”:

mv 2016-* 2016/
ls

## 2016
## 2017

Finally my photos are somewhat organized! Let’s list the files in each directory just to make sure all was moved as planned:

ls 2016/

## 2016-06-20-datasci01.png
## 2016-06-20-datasci02.png
## 2016-06-20-datasci03.png
## 2016-06-21-lab01.jpg
## 2016-06-21-lab02.jpg

ls 2017/

## 2017-01-02-hiking01.jpg
## 2017-01-02-hiking02.jpg
## 2017-02-10-hiking01.jpg
## 2017-02-10-hiking02.jpg

Looks good! There are a few more wildcards beyond the star wildcard which we’ll discuss in the next section where searching file names gets a little more advanced.

4.2.1 Summary

• Wildcards can represent many kinds and numbers of characters.
• The star wildcard (*) represents zero or more of any character.
• You can use wildcards on the command line in order to work with multiple files and folders.

4.2.2 Exercises

1. Before I organized the photos by year, what command would have listed all of the photos of type .png?
2. Before I organized the photos by year, what command would have deleted all of my hiking photos?
3. What series of commands would you use in order to put my figures for a data science course and the pictures I took in the lab into their own folders?

4.3 Search

4.3.1 Regular Expressions

The ability to search through files and folders can greatly improve your productivity using Unix. First we’ll cover searching through text files. I recently downloaded a list of the names of the states in the US. Let’s take a look at this file:

cd ~/Documents
ls

## canada.txt
## states.txt

wc states.txt

## 50      60     472 states.txt

It makes sense that there are 50 lines, but it’s interesting that there are 60 total words. Let’s a take a peak at the beginning of the file:

head states.txt

## Alabama
## Alaska
## Arizona
## Arkansas
## California
## Colorado
## Connecticut
## Delaware
## Florida
## Georgia

This file looks basically how you would expect it to look! You may recall from Chapter 3 that the kind of shell that we’re using is the bash shell. Bash treats different kinds of data differently, and we’ll dive deeper into data types in Chapter 5. For now all you need to know is that text data are called strings. A string could be a word, a sentence, a book, or a file or folder name. One of the most effective ways to search through strings is to use regular expressions. Regular expressions are strings that define patterns in other strings. You can use regular expressions to search for a sub-string contained within a larger string, or to replace one part of a string with another string.

One of the most popular tools for searching through text files is grep. The simplest use of grep requires two arguments: a regular expression and a text file to search. Let’s see a simple example of grep in action and then I’ll explain how it works:

grep "x" states.txt

## New Mexico
## Texas

In the command above, the first argument to grep is the regular expression "x". The "x" regular expression represents one instance of the letter “x”. Every line of the states.txt file that contains at least one instance of the letter “x” is printed to the console. As you can see New Mexico and Texas are the only two state names that contain the letter “x”. Let’s try searching for the letter “q” in all of the state names using grep:

grep "q" states.txt

Nothing is printed to the console because the letter “q” isn’t in any of the state names. We can search for more than individual characters though. For example the following command will search for the state names that contain the word “New”:

grep "New" states.txt

## New Hampshire
## New Jersey
## New Mexico
## New York

In the previous case the regular expression we used was simply "New", which represents an occurrence of the string “New”. Regular expressions are not limited to just being individual characters or words, they can also represent parts of words. For example I could search all of the state names that contain the string “nia” with the following command:

grep "nia" states.txt

## California
## Pennsylvania
## Virginia
## West Virginia

All of the state names above happen to end with the string “nia”.

4.3.2 Metacharacters

Regular expressions aren’t just limited to searching with characters and strings, the real power of regular expressions come from using metacharacters. Remember that metacharacters are characters that can be used to represent other characters. To take full advantage of all of the metacharacters we should use grep’s cousin egrep, which just extends grep’s capabilities. The first metacharacter we should discuss is the "." (period) metacharacter, which represents any character. If for example I wanted to search states.txt for the character “i”, followed by any character, followed by the character “g” I could do so with the following command:

egrep "i.g" states.txt

## Virginia
## Washington
## West Virginia
## Wyoming

The regular expression “i.g” matches the sub-string “irg” in Virginia, and West Virginia, and it matches the sub-string “ing” in Washington and Wyoming. The period metacharacter is a stand-in for the “r” in “irg” and the “n” in “ing” in the example above. The period metacharacter is extremely liberal, for example the command egrep "." states.txt would return every line of states.txt since the regular expression "." would match one occurrence of any character on every line (there’s at least one character on every line).

Besides characters that can represent other characters, there are also metacharacters called quantifiers which allow you to specify the number of times a particular regular expression should appear in a string. One of the most basic quantifiers is "+" (plus) which represents one or more occurrences of the proceeding expression. For example the regular expression “s+as” means: one or more “s” followed by “as”. Let’s see if any of the state names match this expression:

egrep "s+as" states.txt

## Arkansas
## Kansas

Both Arkansas and Kansas match the regular expression "s+as". Besides the plus metacharacter there’s also the "*" (star) metacharacter which represents zero or more occurrences of the preceding expression. Let’s see what happens if we change "s+as" to "s*as":

egrep "s*as" states.txt

## Alaska
## Arkansas
## Kansas
## Massachusetts
## Nebraska
## Texas
## Washington

As you can see the star metacharacter is much more liberal with respect to matching since many more state names are matched by "s*as". There are more specific quantifies you can use beyond “zero or more” or “one or more” occurrences of an expression. You can use curly brackets ({ }) to specify an exact number of occurrences of an expression. For example the regular expression "s{2}" specifies exactly two occurrences of the character “s”. Let’s try using this regular expression:

egrep "s{2}" states.txt

## Massachusetts
## Mississippi
## Missouri
## Tennessee

Take note that the regular expression "s{2}" is equivalent to the regular expression "ss". We could also search for state names that have between two and three adjacent occurrences of the letter “s” with the regular expression "s{2,3}":

egrep "s{2,3}" states.txt

## Massachusetts
## Mississippi
## Missouri
## Tennessee

Of course the results are the same because there aren’t any states that have “s” repeated three times.

You can use a capturing group in order to search for multiple occurrences of a string. You can create capturing groups within regular expressions by using parentheses ("( )"). For example if I wanted to search states.txt for the string “iss” occurring twice in a state name I could use a capturing group and a quantifier like so:

egrep "(iss){2}" states.txt

## Mississippi

We could combine more quantifiers and capturing groups to dream up even more complicated regular expressions. For example, the following regular expression describes three occurrences of an “i” followed by two of any character:

egrep "(i.{2}){3}" states.txt

## Mississippi

The complex regular expression above still only matches “Mississippi”.

4.3.3 Character Sets

For the next couple of examples we’re going to need some text data beyond the names of the states. Let’s just create a short text file from the console:

touch small.txt
echo "abcdefghijklmnopqrstuvwxyz" >> small.txt
echo "ABCDEFGHIJKLMNOPQRSTUVWXYZ" >> small.txt
echo "0123456789" >> small.txt
echo "aa bb cc" >> small.txt
echo "rhythms" >> small.txt
echo "xyz" >> small.txt
echo "abc" >> small.txt
echo "tragedy + time = humor" >> small.txt
echo "http://www.jhsph.edu/" >> small.txt
echo "#%&-=***=-&%#" >> small.txt

In addition to quantifiers there are also regular expressions for describing sets of characters. The \w metacharacter corresponds to all “word” characters, the \d metacharacter corresponds to all “number” characters, and the \s metacharacter corresponds to all “space” characters. Let’s take a look at using each of these metacharacters on small.txt:

egrep "\w" small.txt

## abcdefghijklmnopqrstuvwxyz
## ABCDEFGHIJKLMNOPQRSTUVWXYZ
## 0123456789
## aa bb cc
## rhythms
## xyz
## abc
## tragedy + time = humor
## http://www.jhsph.edu/

egrep "\d" small.txt

## 0123456789

egrep "\s" small.txt

## aa bb cc
## tragedy + time = humor

As you can see in the example above, the \w metacharacter matches all letters, numbers, and even the underscore character (_). We can see the compliment of this grep by adding the -v flag to the command:

egrep -v "\w" small.txt

## #%&-=***=-&%#

The -v flag (which stands for invert match) makes grep return all of the lines not matched by the regular expression. Note that the character sets for regular expressions also have their inverse sets: \W for non-words, \D for non-digits, and \S for non-spaces. Let’s take a look at using \W:

egrep "\W" small.txt

## aa bb cc
## tragedy + time = humor
## http://www.jhsph.edu/
## #%&-=***=-&%#

The returned strings all contain non-word characters. Note the difference between the results of using the invert flag -v versus using an inverse set regular expression.

In addition to general character sets we can also create specific character sets using square brackets ([ ]) and then including the characters we wish to match in the square brackets. For example the regular expression for the set of vowels is [aeiou]. You can also create a regular expression for the compliment of a set by including a caret (^) in the beginning of a set. For example the regular expression [^aeiou] matches all characters that are not vowels. Let’s test both on small.txt:

egrep "[aeiou]" small.txt

## abcdefghijklmnopqrstuvwxyz
## aa bb cc
## abc
## tragedy + time = humor
## http://www.jhsph.edu/

Notice that the word “rhythms” does not appear in the result (it’s the longest word without any vowels that I could think of).

egrep "[^aeiou]" small.txt

## abcdefghijklmnopqrstuvwxyz
## ABCDEFGHIJKLMNOPQRSTUVWXYZ
## 0123456789
## aa bb cc
## rhythms
## xyz
## abc
## tragedy + time = humor
## http://www.jhsph.edu/
## #%&-=***=-&%#

Every line in the file is printed, because every line contains at least one non-vowel! If you want to specify a range of characters you can use a hyphen (-) inside of the square brackets. For example the regular expression [e-q] matches all of the lowercase letters between “e” and “q” in the alphabet inclusively. Case matters when you’re specifying character sets, so if you wanted to only match uppercase characters you’d need to use [E-Q]. To ignore the case of your match you could combine the character sets with the [e-qE-Q] regex (short for regular expression), or you could use the -i flag with grep to ignore the case. Note that the -i flag will work for any provided regular expression, not just character sets. Let’s take a look at some examples using the regular expressions that we just described:

egrep "[e-q]" small.txt

## abcdefghijklmnopqrstuvwxyz
## rhythms
## tragedy + time = humor
## http://www.jhsph.edu/

egrep "[E-Q]" small.txt

## ABCDEFGHIJKLMNOPQRSTUVWXYZ

egrep "[e-qE-Q]" small.txt

## abcdefghijklmnopqrstuvwxyz
## ABCDEFGHIJKLMNOPQRSTUVWXYZ
## rhythms
## tragedy + time = humor
## http://www.jhsph.edu/

4.3.4 Escaping, Anchors, Odds, and Ends

One issue you may have thought about during our little exploration of regular expressions is how to search for certain punctuation marks in text considering that those same symbols are used as metacharacters! For example, how would you find a plus sign (+) in a line of text since the plus sign is also a metacharacter? The answer is simply using a backslash (\) before the plus sign in a regex, in order to “escape” the metacharacter functionality. Here are a few examples:

egrep "\+" small.txt

## tragedy + time = humor

egrep "\." small.txt

## http://www.jhsph.edu/

There are three more metacharacters that we should discuss, and two of them come as a pair: the caret (^), which represents the start of a line, and the dollar sign ($) which represents the end of line. These “anchor characters” only match the beginning and ends of lines when coupled with other regular expressions. For example, going back to looking at states.txt, I could search for all of the state names that begin with “M” with the following command:

egrep "^M" states.txt

## Maine
## Maryland
## Massachusetts
## Michigan
## Minnesota
## Mississippi
## Missouri
## Montana

Or we could search for all of the states that end in “s”:

egrep "s$" states.txt

## Arkansas
## Illinois
## Kansas
## Massachusetts
## Texas

There’s a mnemonic that I love for remembering which metacharacter to use for each anchor: “First you get the power, then you get the money.” The caret character is used for exponentiation in many programming languages, so “power” (^) is used for the beginning of a line and “money” ($) is used for the end of a line.

Finally, let’s talk about the “or” metacharacter (|), which is also called the “pipe” character. This metacharacter allows you to match either the regex on the right or on the left side of the pipe. Let’s take a look at a small example:

egrep "North|South" states.txt

## North Carolina
## North Dakota
## South Carolina
## South Dakota

In the example above we’re searching for lines of text that contain the words “North” or “South”. You can also use multiple pipe characters to, for example, search for lines that contain the words for all of the cardinal directions:

egrep "North|South|East|West" states.txt

## North Carolina
## North Dakota
## South Carolina
## South Dakota
## West Virginia

Just two more notes on grep: you can display the line number that a match occurs on using the -n flag:

egrep -n "t$" states.txt

## 7:Connecticut
## 45:Vermont

And you can also grep multiple files at once by providing multiple file arguments:

egrep "New" states.txt canada.txt

## states.txt:New Hampshire
## states.txt:New Jersey
## states.txt:New Mexico
## states.txt:New York
## canada.txt:Newfoundland and Labrador
## canada.txt:New Brunswick

You now have the power to do some pretty complicated string searching using regular expressions! Imagine you wanted to search for all of the state names that both begin and end with a vowel. Now you can:

egrep "^[AEIOU]{1}.+[aeiou]{1}$" states.txt

## Alabama
## Alaska
## Arizona
## Idaho
## Indiana
## Iowa
## Ohio
## Oklahoma

I know there a many metacharacters to keep track of here so below I’ve included a table with several of the metacharacters we’ve discussed in this chapter:

Metacharacter	Meaning
.	Any Character
\w	A Word
\W	Not a Word
\d	A Digit
\D	Not a Digit
\s	Whitespace
\S	Not Whitespace
[def]	A Set of Characters
[^def]	Negation of Set
[e-q]	A Range of Characters
^	Beginning of String
$	End of String
\n	Newline
+	One or More of Previous
*	Zero or More of Previous
?	Zero or One of Previous
|	Either the Previous or the Following
{6}	Exactly 6 of Previous
{4, 6}	Between 4 and 6 or Previous
{4, }	More than 4 of Previous

If you want to experiment with writing regular expressions before you use them I highly recommend playing around with http://regexr.com/.

4.3.5 find

If you want to find the location of a file or the location of a group of files you can use the find command. This command has a specific structure where the first argument is the directory where you want to begin the search, and all directories contained within that directory will also be searched. The first argument is then followed by a flag that describes the method you want to use to search. In this case we’ll only be searching for a file by its name, so we’ll use the -name flag. The -name flag itself then takes an argument, the name of the file that you’re looking for. Let’s go back to the home directory and look for some files from there:

cd
pwd

## /Users/sean

Let’s start by looking for a file called states.txt:

find . -name "states.txt"

## ./Documents/states.txt

Right where we expected it to be! Now let’s try searching for all .jpg files:

find . -name "*.jpg"

## ./Photos/2016-06-21-lab01.jpg
## ./Photos/2016-06-21-lab02.jpg
## ./Photos/2017/2017-01-02-hiking01.jpg
## ./Photos/2017/2017-01-02-hiking02.jpg
## ./Photos/2017/2017-02-10-hiking01.jpg
## ./Photos/2017/2017-02-10-hiking02.jpg

Good file hunting out there!

4.3.6 Summary

• grep and egrep can be used along with regular expressions to search for patterns of text in a file.
• Metacharacters are used in regular expressions to describe patterns of characters.
• find can be used to search for the names of files in a directory.

4.3.7 Exercises

1. Search states.txt and canada.txt for lines that contain the word “New”.
2. Make five text files containing the names of states that don’t contain one of each of the five vowels.
3. Download the GitHub repository for this book and find out how many .html files it contains.

4.4 Configure

4.4.1 History

Near the start of this book we discussed how you can browse the commands that you recently entered into the prompt using the Up and Down arrow keys. Bash keeps track of all of your recent commands, and you can browse your command history two different ways. The commands that we’ve used since opening our terminal can be accessed via the history command. Let’s try it out:

history

## ...
## 48 egrep "^M" states.txt
## 49 egrep "s$" states.txt
## 50 egrep "North|South" states.txt
## 51 egrep "North|South|East|West" states.txt
## 52 egrep -n "t$" states.txt
## 53 egrep "New" states.txt canada.txt
## 54 egrep "^[AEIOU]{1}.+[aeiou]{1}$" states.txt
## 55 cd
## 56 pwd
## 57 find . -name "states.txt"
## 58 find . -name "*.jpg"
## 59 history

We’ve had our terminal open for a while so there are tons of commands in our history! Whenever we close a terminal our recent commands are written to the ~/.bash_history file. Let’s a take a look at the beginning of this file:

head -n 5 ~/.bash_history

## echo "Hello World!"
## pwd
## cd
## pwd
## ls

Looks like the very first commands we entered into the terminal! Searching your ~/.bash_history file can be particularly useful if you’re trying to recall a command you’ve used in the past. The ~/.bash_history file is just a regular text file, so you can search it with grep. Here’s a simple example:

grep "canada" ~/.bash_history

## egrep "New" states.txt canada.txt

4.4.2 Customizing Bash

Besides ~/.bash_history, another text file in our home directory that we should be aware of is ~/.bash_profile. The ~/.bash_profile is a list of Unix commands that are run every time we open our terminal, usually with a different command on every line. One of the most common commands used in a ~/.bash_profile is the alias command, which creates a shorter name for a command. Let’s take a look at a ~/.bash_profile:

alias docs='cd ~/Documents'
alias edbp='nano ~/.bash_profile'

The first alias creates a new command docs. Now entering docs into the command line is the equivalent of entering cd ~/Documents into the comamnd line. Open let’s edit our ~/.bash_profile with nano. If there’s anything in your ~/.bash_profile already then start adding lines at the end of the file. Add the line alias docs='cd ~/Documents', then save the file and quit nano. In order to make the changes to our ~/.bash_profile take effect we need to run source ~/.bash_profile in the console:

source ~/.bash_profile

Now let’s try using docs:

docs
pwd

## /Users/sean/Documents

It works! Setting different aliases allows you to save time if there are long commands that use often. In the example ~/.bash_profile above, the second line, alias edbp='nano ~/.bash_profile' creates the command edbp (edit bash profile) so that you can quickly add aliases. Try adding it to your ~/.bash_profile and take your new command for a spin!

There are a few other details about the ~/.bash_profile that are important when you’re writing software which we’ll discuss in the Bash Programming chapter.

4.4.3 Summary

• history displays what commands we’ve entered into the console since opening our current terminal.
• The ~/.bash_history file lists commands we’ve used in the past.
• alias creates a command that can be used as a substitute for a longer command that we use often.
• The ~/.bash_profile is a text file that is run every time we start a shell, and it’s the best place to assign aliases.

4.5 Differentiate

It’s important to be able to examine differences between files. First let’s make two small simple text files in the Documents directory.

cd ~/Documents
head -n 4 states.txt > four.txt
head -n 6 states.txt > six.txt

If we want to look at which lines in these files are different we can use the diff command:

diff four.txt six.txt

## 4a5,6
## > California
## > Colorado

Only the differing lines are printed to the console. We could also compare differing lines in a side-by-side comparison using sdiff:

sdiff four.txt six.txt

## Alabama              Alabama
## Alaska               Alaska
## Arizona              Arizona
## Arkansas             Arkansas
##                    > California
##                    > Colorado

In a common situation you might be sent a file, or you might download a file from the internet that comes with code known as a checksum or a hash. Hashing programs generate a unique code based on the contents of a file. People distribute hashes with files so that we can be sure that the file we think we’ve downloaded is the genuine file. One way we can prevent malicious individuals from sending us harmful files is to check to make sure the computed hash matches the provided hash. There are a few commonly used file hashes but we’ll talk about two called MD5 and SHA-1.

Since hashes are generated based on file contents, then two identical files should have the same hash. Let’s test this my making a copy of states.txt.

cp states.txt states_copy.txt

To compute the MD5 hash of a file we can use the md5 command:

md5 states.txt

## MD5 (states.txt) = 8d7dd71ff51614e69339b03bd1cb86ac

md5 states_copy.txt

## MD5 (states_copy.txt) = 8d7dd71ff51614e69339b03bd1cb86ac

As we expected they’re the same! We can compute the SHA-1 hash using the shasum command:

shasum states.txt

## 588e9de7ffa97268b2448927df41760abd3369a9  states.txt

shasum states_copy.txt

## 588e9de7ffa97268b2448927df41760abd3369a9  states_copy.txt

Once again, both copies produce the same hash. Let’s make a change to one of the files, just to illustrate the fact that the hash changes if file contents are different:

head -n 5 states_copy.txt > states_copy.txt
shasum states_copy.txt

## b1c1c805f123f31795c77f78dd15c9f7ac5732d4  states_copy.txt

4.5.1 Summary

• The md5 and shasum commands use different algorithms to create codes (called hashes or checksums) that are unique to the contents of a file.
• These hashes can be used to ensure that a file is genuine.

4.6 Pipes

One of the most powerful features of the command line is skilled use of the pipe (|) which you can usually find above the backslash (\) on your keyboard. The pipe allows us to take the output of a command, which would normally be printed to the console, and use it as the input to another command. It’s like fitting an actual pipe between the end of one program and connecting it to the top of another program! Let’s take a look at a basic example. We know the cat command takes the contents of a text file and prints it to the console:

cd ~/Documents
cat canada.txt

## Nunavut
## Quebec
## Northwest Territories
## Ontario
## British Columbia
## Alberta
## Saskatchewan
## Manitoba
## Yukon
## Newfoundland and Labrador
## New Brunswick
## Nova Scotia
## Prince Edward Island

This output from cat canada.txt will go into our pipe, and we’ll attach the dispensing end of the pipe to head, which we use to look at the first few lines of a file:

cat canada.txt | head -n 5

Nunavut
Quebec
Northwest Territories
Ontario
British Columbia

Notice that this is the same result we would get from head -n 5 canada.txt, we just used cat to illustrate how the pipe works. The general syntax of the pipe is [program that produces output] | [program uses pipe output as input instead of a file].

A more common and useful example where we could use the pipe is answering the question: “How many US states end in a vowel?” We could use grep and regular expressions to list all of the state names that end with a vowel, then we could use wc to count all of the matching state names:

grep "[aeiou]$" states.txt | wc -l

## 32

The pipe can also be used multiple times in one command in order to take the output from one piped command and use it as the input to yet another program! For example we could use three pipes with ls, grep, and less so that we could scroll through the files in out current directory were created in February:

ls -al | grep "Feb" | less

-rw-r--r--   1 sean  staff   472 Feb 22 13:47 states.txt

Remember you can use the Q key to quit less and return to the prompt.

4.6.1 Summary

• The pipe (|) takes the output of the program on its left side and directs the output to be the input for the program on its right side.

4.6.2 Exercises

1. Use pipes to figure out how many US states contain the word “New.”
2. Examine your ~/.bash_history to try to figure out how many unique commands you’ve ever used. (You may need to look up how to use the uniq and sort commands).

4.7 Make

Once upon a time there were no web browsers, file browsers, start menus, or search bars. When somebody booted up a computer all they got a was a shell prompt, and all of the work they did started from that prompt. Back then people still loved to share software, but there was always the problem of how software should be installed. The make program is the best attempt at solving this problem, and make’s elegance has carried it so far that it is still in wide use today. The guiding design goal of make is that in order to install some new piece of software one would:

1. Download all of the files required for installation into a directory.
2. cd into that directory.
3. Run make.

This is accomplished by specifying a file called makefile, which describes the relationships between different files and programs. In addition to installing programs, make is also useful for creating documents automatically. Let’s build up a makefile that creates a readme.txt file which is automatically populated with some information about our current directory.

Let’s start by creating a very basic makefile with nano:

cd ~/Documents/Journal
nano makefile

draft_journal_entry.txt:
  touch draft_journal_entry.txt

The simple makefile above shows illustrates a rule which has the following general format:

[target]: [dependencies...]
  [commands...]

In the simple example we created draft_journal_entry.txt is the target, a file which is created as the result of the command(s). It’s very important to note that any commands under a target must be indented with a Tab. If we don’t use Tabs to indent the commands then make will fail. Let’s save and close the makefile, then we can run the following in the console:

ls

## makefile

Let’s use the make command with the target we want to be “made” as the only argument:

make draft_journal_entry.txt

## touch draft_journal_entry.txt

ls

## draft_journal_entry.txt
## makefile

The commands that are indented under our definition of the rule for the draft_journal_entry.txt target were executed, so now draft_journal_entry.txt exists! Let’s try running the same make command again:

make draft_journal_entry.txt

## make: 'draft_journal_entry.txt' is up to date.

Since the target file already exists no action is taken, and instead we’re informed that the rule for draft_journal_entry.txt is “up to date” (there’s nothing to be done).

If we look at the general rule format we previously sketched out, we can see that we didn’t specify any dependencies for this rule. A dependency is a file that the target depends on in order to be built. If a dependency has been updated since the last time make was run for a target then the target is not “up to date.” This means that the commands for that target will be run the next time make is run for that target. This way, the changes to the dependency are incorperated into the target. The commands are only run when the dependencies or change, or when the target doesn’t exist at all, in order to avoid running commands unnecessarily.

Let’s update our makefile to include a readme.txt that is built automatically. First, let’s add a table of contents for our journal:

echo "1. 2017-06-15-In-Boston" > toc.txt

Now let’s update our makefile with nano to automatically generate a readme.txt:

nano makefile

draft_journal_entry.txt:
  touch draft_journal_entry.txt
  
readme.txt: toc.txt
  echo "This journal contains the following number of entries:" > readme.txt
  wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt

Take note that the -o flag provided to egrep above extracts the regular expression match from the matching line, so that only the number of lines is appended to readme.txt. Now let’s run make with readme.txt as the target:

make readme.txt

## echo "This journal contains the following number of entries:" > readme.txt
## wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt

Now let’s take a look at readme.txt:

cat readme.txt

## This journal contains the following number of entries:
## 1

Looks like it worked! What do you think will happen if we run make readme.txt again?

make readme.txt

## make: 'readme.txt' is up to date.

You guessed it: nothing happened! Since the readme.txt file still exists and no changes were made to any of the dependencies for readme.txt (toc.txt is the only dependency) make doesn’t run the commands for the readme.txt rule. Now let’s modify toc.txt then we’ll try running make again.

echo "2. 2017-06-16-IQSS-Talk" >> toc.txt
make readme.txt

## echo "This journal contains the following number of entries:" > readme.txt
## wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt

Looks like it ran! Let’s check readme.txt to make sure.

cat readme.txt

## This journal contains the following number of entries:
## 2

It looks like make successfully updated readme.txt! With every change to toc.txt, running make readme.txt will programmatically update readme.txt.

In order to simplify the make experience, we can create a rule at the top of our makefile called all where we can list all of the files that are built by the makefile. By adding the all target we can simply run make without any arguments in order to build all of the targets in the makefile. Let’s open up nano and add this rule:

nano makefile

all: draft_journal_entry.txt readme.txt

draft_journal_entry.txt:
  touch draft_journal_entry.txt
  
readme.txt: toc.txt
  echo "This journal contains the following number of entries:" > readme.txt
  wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt

While we have nano open let’s add another special rule at the end of our makefile called clean which destroys the files created by our makefile:

all: draft_journal_entry.txt readme.txt

draft_journal_entry.txt:
  touch draft_journal_entry.txt
  
readme.txt: toc.txt
  echo "This journal contains the following number of entries:" > readme.txt
  wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt
  
clean:
  rm draft_journal_entry.txt
  rm readme.txt

Let’s save and close our makefile then let’s test it out first let’s clean up our repository:

make clean
ls

## rm draft_journal_entry.txt
## rm readme.txt
## makefile
## toc.txt

make
ls

## touch draft_journal_entry.txt
## echo "This journal contains the following number of entries:" > readme.txt
## wc -l toc.txt | egrep -o "[0-9]+" >> readme.txt
## draft_journal_entry.txt
## readme.txt
## makefile
## toc.txt

Looks like our makefile works! The make command is extremely powerful, and this section is meant to just be an introduction. For more in-depth reading about make I recommend Karl Broman’s tutorial or Chase Lambert’s makefiletutorial.com.

4.7.1 Summary

• make is a tool for creating relationships between files and programs, so that files that depend on other files can be automatically rebuilt.
• makefiles are text files that contain a list of rules.
• Rules are made up of targets (files to be built), commands (a list of bash commands that build the target), and dependencies (files that the target depends on to be built).