ASQ-Statistics, Division. 1996. Glossary and Tables for Statistical Quality Control. 3rd ed. Milwaukee, Wisconsin: ASQ Quality Press.

Borror, C. M., C. W. Champ, and s. E. Rigdon. 1998. “Poisson Ewma Control Charts.” Journal of Quality Technology 30 (4): 352–61.

Borror, C.M., and C.W. Champ. 2001. “Phase 1 Control Charts for Independent Bernoulli Data.” Quality and Reliability Engineering International 17: 391–96.

Box, G. E. P. 1966. “Use and Abuse of Regression.” Technometrics 8 (4): 625–29.

Britz, G. C., D. W. Emerling, L. B. Hare, R. W. Hoerl, S. J. Janis, and J. E. Shade. 2000. Improving Performance Through Statistical Thinking. Milwaukee, Wisconsin: ASQ Quality Press.

Burdick, R.K., Borror C. M., and D. C. Montgomery. 2005. Design and Analysis of Gauge R&R Studies. Philadelphia, PA: SIAM Society for Industrial; Applied Matematics.

Burke, S. E., and R. T. Silvestrini. 2017. The Certified Quality Engineer Handbook 4th Ed. Milwaukee, Wisconsin: ASQ Quality Press.

Carlton, M. A., and J. L. Devore. 2017. Probability with Applications in Engineering, Science, and Technology. 2nd ed. Switzerland: Springer.

Christensen, C., K.M. Betz, and M.S. Stein. 2013. The Certified Quality Process Analyst Handbook. 2nd ed. Milwaukee, Wisconsin: ASQ Quality Press.

Deming, W.E. 1986. Out of the Crisis. Cambridge, Mass.: MIT Center for Advance Engineering Study.

Dodge, H.F., and H.G. Romig. 1941. “Single and Double Sampling Inspection Tables.” Bell System Technical Journal 20 (1): 1–61.

———. 1959. Sampling Inspection Tables, Single and Double Sampling. 2nd ed. New York: John Wiley; Sons.

Durakovic, B. 2017. “Design of Experiments Application, Concepts, Examples: State of the Art.” Periodicicals of Engineering and Natural Sciences 5 (3): 421–39.

Freeman, H. F. 1937. “Statistical Methods for Quality Control.” Mechanical Engineering, 261.

Gandy, A., and J. T. Kvaloy. 2013. “Guarranteed Conditional Performance of Control Charts via Bootstrap Methods.” Scandinavian Journal of Statistics 40: 647–68.

———. 2015. Spcadjust: Functions for Calibrating Control Charts.

Groemping, U. 2019a. DoE.base: Full Factorials, Orthogonal Arrays and Base Utilities for Doe.

———. 2019b. FrF2: Fractional Factorial Designs with 2-Level Factors.

Hawkins, D. M. 1981. “A Cusum for a Scale Parameter.” Journal of Quality Technology 13 (4): 228–31.

———. 1993. “Cusum Control Charting: An Underutilized Spc Tool.” Quality Engineering 5 (3): 463–77.

Hawkins, D. M., and D. H. Olwell. 1997. Cumulative Sum Charts and Charting for Quality Improvement. New York, N.Y.: Springer.

Hill, W. J., and W. R. Demier. 1970. “More on Planning Experiments to Increase Research Efficiency.” Industrial and Engineering Chemistry 62 (10).

Ishikawa, K. 1982. A Guide to Quality Control. 2nd ed. Tokyo: Asian Productivity Organization.

J., Youden W., and E. H. Steiner. 1975. Statistical Manual of the Association of Official Analytical Chemists. Association of Official Analytical Chemists.

Johnson, L., and K. McNeilly. 2011. “Results May Not Vary.” Quality Progress 44 (5): 61–65.

Joiner, B. L. 1994. Fourth Generation Management - the New Business Consciousness. New York, NY: McGraw-Hill, Inc.

Jones, B., and C. J. Nachtsheim. 2011. “A Class of Three-Level Designs for Definitive Screening in the Presence of Second Order Effects.” Journal of Quality Technology 43 (1): 1–15.

———. 2013. “Definitive Screening with Added Two-Level Categorical Factors.” Journal of Quality Technology 45 (2): 121–29.

Kerns, G. J. 2011. Introduction to Probability and Statistics Using R. G. J. Kerns.

Kiermeier, A. 2019. AcceptanceSampling: Creation and Evaluation of Acceptance Sampling Plans.

Knoth, S. 2019. Spc: Statistical Process Control – Calculation of Arl and Other Control Chart Performance Measures.

Lawson, J. 2015. Design and Analysis of Experiments with R. Boca Raton, Florida: Chapman; Hall/CRC.

———. 2016. Daewr: Design and Analysis of Experiments with R.

———. 2019. AQLSchemes: AQL Based Acceptance Sampling Schemes.

Lawson, J. S. 2019. “Phase I I Monitoring of Variability Using Individual Observations.” Quality Engineering 31 (3): 417–29.

Lieberman, G.J., and G.J. Resnikoff. 1955. “Sampling Plans for Inspection by Variables.” Journal of the American Statistical Association 50: 467–516.

Lucas, J.M. 1985. “Counted Data Cusum’s.” Technometrics 27 (2): 129–43.

Lucas, J.M., and R.B. Crosier. 1982. “Fast Initial Response for Cusum Quality Control Schemes: Give Your Cusum a Head Start.” Technometrics 24 (3): 199–205.

Mitra, A. 1998. Fundamentals of Quality Control and Improvement. Upper Saddle River, New Jersey: Prentice Hall.

Montgomery, D.C. 2013. Introduction to Statistical Quality Control. 7th ed. Hoboken, New Jersey: John Wiley & Sons.

Olsen, R., J. Lawson, N. Rohbok, and B. Woodfield. 2016. “Practical Comparison of Traditional and Definitive Screening Designs in Chemical Process Development.” Int. J. Experimental Design and Process Optimisation 5 (1/2): 1–22.

Ott, E. R. 1975. Process Quality Control-Troubleshooting and Interpretation of Data. New York, N. Y.: McGraw-Hill.

Romboski, L.D. 1969. “An Investigation of Quick Switching Acceptance Sampling Systems.” PhD thesis, Rutgers-The State University, New Brunswick, N.J.: PhD Dissertation.

Roth, T. 2016. Qcc: Statistical Methods for Quality Science.

Schilling, E.G., and D. V. Neubauer. 2017. Acceptance Sampling in Quality Control. 3rd ed. Boca Raton, Florida: Chapman; Hall/CRC.

Scrucca, L. 2017. Qcc: Quality Control Charts.

Shewhart, W.A. 1931. Economic Control of Quality of Manufactured Product. New York: D. Van Nostrand.

Shmueli. 2016. Practical Acceptance Sampling - a Hands-on Guide. 2rd ed. Green Cove Springs, FL: Axelrod Schnall Piblishers.

Snee, R. D. 1985. “Experimenting with a Large Number of Variables.” In Experiments in Industry Design Analysis and Interpretation of Results, edited by Ronald Snee, Lynne B. Hare, and J. Richard Trout. Milwaukee, Wisconsin: American Society for Quality Control.

Steiner, S. H. 1999. “EWMA Control Chart with Time Varying Control Limits and Fast Initial Response.” Journal of Quality Technology 31 (1): 75–86.

Stephens, K.S., and K.E. Larson. 1967. “An Evaluation of the Mil-Std-105d System of Sampling Plans.” Industrial Quality Control 23 (7).

Summers, D. C. S. 2000. Quality. 2nd ed. Upper Saddle River, N.J.: Prentice Hall.

Taguchi, G., and Y. Wu. 1979. Introduction to Off-Line Quality Control. Central Japan Quality Control Association.

TaskSubcommittee, A.I.A.G. 1992. Statistical Process Control (Spc) Reference Manual. Troy Michigan: Automotive Industry Action Group.

Vance, L.C. 1986. “Average Run Lengths of Cumulative Sum Control Charts for Controlling Normal Means.” Journal of Quality Technology 18: 189–93.

Wernimount, G. 1977. “Ruggedness Evaluation of Test Procedures.” ASTM Standardization News, 5: 61–64.

White, C.H., and J. B. Keats. 1996. “ARLs and Higher-Order Run-Length Moments for the Poisson Cusum.” Journal of Quality Technology 28 (3): 363–69.

White, C.H., J.B. Keats, and J. Stanley. 1997. “Poisson Cusum Versus c Chart for Defect Data.” Quality Engineering 9 (4): 673–79.

Wickham, H., and G. Grolemund. 2017. R for Data Science-Import, Tidy, Transform, Visualize and Model Data. Sebastopol, CA: O’Reiilly Media Inc.